Waste: Service Truck

PreView Has Your Blind Spot Covered

VEHICLE TYPE : Waste Service Truck

Value added options are available with this system, including:

Replace your in-cab display with the ClearPath Camera and Monitor system
Connect the PreView Sensor to an existing camera system using VideoLink
Integrate the backup alarm to the PreView Radar Sensor to trigger when objects are detected with PreView Safety Alert System

The display unit provides an audible and visual warning to the operator when an object or pedestrian is in the blind spot. This gives the driver extra time to react to prevent an accident.
You can upgrade to the PreView® Plus Monitor and Cameras System for added visual verification. The PreView Plus system provides the same audible warning for the driver, while imposing colored indicators directly onto the monitor for a single point of focus.
The cable is fed through the service truck to connect the sensor to the display unit.
One WorkZone PreView® sensor is mounted on the rear-center of the service truck. This will detect objects approximately the width of the vehicle and extend 10 feet from the bumper of the service truck.
The add-on optional PreView Plus camera is mounted to the back of the truck.

Vehicle image:

DIMENSIONS	DETECTION ZONES by MODEL #	SPECIFICATIONS
Sensor Unit: 9.25”(w) x 1.60”(d) x 4.36”(h)	SUGGESTED: WorkZone PreView (10’)	Op. Temps: -40 – +185 F / -40 – +85 C
In-Cab Display: 2.3” (w) x 2” (d) x 1”(h)	OPTION: Replace display with PreView Plus camera and monitor.	Current Draw: < 1/2 AMP
NOTE: Fleet version avail. with audible only